Need help?Do you have a question about the NKE REGATTA and is the answer not in the manual?
Accurate measurement of wind, boat speed, and attitude.
High-speed data flow and fast interface with onboard PCs.
Integrated safety features, light Linux OS, and auto-diagnostic log.
Simple and open formats for variables, protocols, and calibration files.
Internal communication for diagnostics and modeling.
Customizable functions and open IP protocol for variable exchange.
Easy Processor Regatta updates via IP or Toplink peripherals.
Allows PC standby mode and enhances wind data for autopilot steering.
Install all units except Processor Regatta first; use Multigraphic/Gyrographic as Master.
Update components via Toplink2 software or send units to customer support.
Add Processor Regatta to network after updating components; it becomes the Master.
Details connection options between Processor Regatta and PC via Ethernet.
Prerequisites and access methods for connecting the Processor Regatta to a PC.
Specifies the physical connection details for the Topline bus.
Describes the NMEA1/Compass connector and its capabilities.
Details the NMEA 2 connector for NMEA device input/output.
Lists accepted NMEA sentences and their functions for the Processor Regatta.
Defines the priority order for NMEA data input from the Topline bus.
Lists NMEA sentences that the Processor Regatta can output.
Links to the Reboot and Stop buttons for processor management.
Accesses calibration tools for wind, boat speed, polar tables, and constants.
Accesses the main configuration settings for the Processor Regatta.
Provides access to logs, updates, backup, and network settings.
Controls Processor Regatta configuration via the instal.ini file.
Adjusts constants not accessible from other displays using the Calib.ini file.
Sets display and export formats for functions via NMEA output.
Describes algorithms for processing boat motion data like heading and attitude.
Details algorithms for processing boat speed data from sensors.
Explains algorithms for processing apparent and true wind data.
Importance of sensor calibration for accurate performance data.
Recommended sequence for calibrating compass, speed, and wind sensors.
Refers to sensor manual for compass calibration procedures.
Instructions for calibrating roll and pitch using levels and specific menus.
Explains boat speed measurement and calibration methods.
Adjusts boat speed calibration based on heel angle for specific hull designs.
Details methods for evaluating and calibrating boat drift.
Adjusts mast alignment and wind shear corrections for apparent wind angle.
Addresses wind speed measurement disruptions and recommends calibration.
Corrects True Wind Angle by tacking and recording direction values.
Explains how to read and interpret polar tables for performance data.
Explains how to interpret polar diagrams showing boat speed vs. wind conditions.
Displays performance functions generated from polar tables for fine-tuning.
Guides PC configuration for initial connection to the Processor Regatta.
Instructions for physically connecting the Processor Regatta to the PC.
Steps to set a fixed IP address for PC network connection in Windows 7.
Steps to set a fixed IP address for PC network connection in Windows 10.
Verifies the PC connection to the Processor Regatta using a PING command.
General| Brand | NKE |
|---|---|
| Model | REGATTA |
| Category | Computer Hardware |
| Language | English |
To Next Page