20 47_processor_Regatta_um_UK_40
MeasLeewayOff = 0.0 ; Offset capteur de derive (degrees)
Offset of the drift sensor in degrees.
[MotionWindComp]
WindVaneHigh = 30.0 ; Hauteur Aerien/Centre Rotation avec gite (metres)
Height in meters of the wind sensor in relation to the center of rotation of the boat.
Coef1 = 6
Wind noise reduction coefficients configured for a sensor 3DV2,
Coef2 = 3
3DV3 and Quadrans. For KVH (Gyrotrack) use coefficients
Coef1 = 4, coef2 = 2.
6.3 Configure the file variable.csv
This file controls the way the functions are displayed on the Gyropilot Graphic and sets
them for export via the NMEA output port (NMEA2). It must be downloaded via the « ftp »
protocol at:
ftp://root:pass@192.168.0.232/mnt/flash/processor/SailNet
/
Once modified and saved, it has to be uploaded to the same address in the Processor
Regatta. A « Reboot » will be required. This is performed from the home page by
pressing the “Action” button.
Num: id of the variable.
Help: English description of the variable.
En10Name: English name of variable.
En3Unit: Unit of variable (English).
Aide: French description of the variable.
Fr10Nom: French name of the variable.
Fr3Unit: Unit of variable (French).
View: toggle the variable display on Gyropilot Graphic. N = not displayed, Y = displayed.
Group: Name of the group of the variable.
ToplineDef: Name of the Topline variable. (Do not modify. For internal use only)
IntFormat: Format of the variable in the Topline bus and data log files. (Do not modify.
For internal use only)
FloatForm: Format of the variable in the Topline bus and data log files. (Do not modify.
For internal use only)
Zoom: Coefficient used to enhance data presence in data log files. (user can adjust this
value)
HzTopline: Definition of variables rate in Topline bus. (Do not modify. For internal use
only)
NmeaIN: This column indicates the NMEA sentences used by the NMEA input.
Custom
:
Gives authorization for a user’s variable coming from a NMEA input and a LUA
file.
WARNING
We recommend keeping a copy of the file before doing any modification.
To Next Page
Loading...