Need help?Do you have a question about the NKE WiMo and is the answer not in the manual?
General| Category | Marine Equipment |
|---|---|
| Technology | Wireless |
| Waterproof | Yes |
| Communication | Wireless |
| Protection Rating | IP67 |
| Power Supply | Battery |
Details the specifications for the WiMo sonde, including number of locations and operating environment.
Details the specifications for the WiMo Plus sonde, including number of locations and operating environment.
Explains the functionality, characteristics, and measurement of the pressure sensor.
Describes the smart wiper for sensor cleaning and its self-configuration.
Details the installation procedure for the wiper on a WiMo probe.
Details the installation procedure for the wiper on a WiMo Plus probe.
Instructions for installing and removing sensors and protective caps from the sonde.
Step-by-step guide for installing and removing sensor location caps.
Step-by-step guide for installing and removing sensors from the sonde.
Explains how to install and remove the guard for sensor protection and anti-fouling.
Information on specific protection guards for ISE sensors.
Instructions on how to activate the sonde's Wi-Fi connection.
Details on connecting to the sonde via Wi-Fi using different devices.
Steps for connecting the WiMo sonde to a PC via Wi-Fi.
Steps for connecting the WiMo sonde to a tablet via Wi-Fi.
Steps for connecting the WiMo sonde to a smartphone via Wi-Fi.
Description of the dashboard as the sonde's home page for setup and recording.
Configuration options for general settings, product info, and battery.
Settings related to data storage, file formats, and memory usage.
Settings for Wi-Fi network and Modbus RTU communication.
How to view, manage, and add available measurement parameters.
Information about connected accessories, such as the wiper.
Settings for data acquisition parameters, sampling modes, and deployment comments.
How to view, download, and delete measurement files.
How to display real-time measurements graphically, analytically, or both.
Configuration and management of probe alarms, including low battery warnings.
A five-step guide to operating the sonde from connection to deployment.
Guidance on regular cleaning, visual inspection, and deposit removal.
How to service, inspect, and grease O-rings for proper sealing.
Procedures for cleaning and inspecting sensor ports before installation.
Step-by-step instructions for replacing the probe's D-type batteries.
Explanation of the Topkapi TXT2 file format, its naming, and structure.
Description of the CSV file format and its naming convention for data export.
Details on the data content, columns, and values found in CSV files.
Information on configuration settings included in measurement files (XML format).
Details on the 3G/4G WiMo modem, its features, and specifications.
Configuration options for the 3G/4G modem's network, GPS, and alarms.
Description of the 20-liter float accessory for deploying probes.
Description of the coastal WiMO buoy designed for hosting sondes and modems.
To Next Page
