NKE WiMo - 6.2.2 settings

WiMo / WiMo Plus Multiparameters Sondes
29
File formats
The description of the XML fields is as follows
PROBE
eH0
Product name
eH1
Product type
eH2
Serial number
eH3
Software version
eH4
Number of channels
COMMENT
eX0
Comment on Deployment
STATUS
eS0
Memory capacity
eS1
Battery capacity
SENSOR_X
eS0
Sensor ID
eS1
Manufacturer
eS2
Sensor name
CHANNEL_X
eC0
Measurement channel name and type
eC1
Unit
eC2
Number of measurement precision digits
eC4
Measurement mean (do not change without nke notice)
CALIBRATION
eT0
Type of calibration (Raw, linear, etc.)
eC0
If Steinardt for example, A coefficient
eC1
If Steinardt for example, B coefficient
POINT
eP0
Physical value of the calibration point
eP1
Raw value of the calibration point