NKE WiMo - Maintenance; 4.1 Routine Maintenance

WiMo / WiMo Plus Multiparameters Sondes
23
WEB Interface
3.5 Operates sonde in Five steps
Step N°1 : Connect all sensors and
accessories to the sonde
Step N°2 : Activate Wi-Fi (cf. §2.3) and
connect to the sonde (cf. §2.4)
Step N°3 : Open the communication
interface (cf. §3)
Step N°4 : Check that all sensors have been
detected and set up the acquisition
Step N°5 : turn on the probe
Once the Wi-Fi shuts down the
probe can be deployed