1.4.2 Installation on a WiMo Plus probe
On version 7 locations (WiMo Plus) the position of the wiper is unique and central.
2 Operation
2.1 Sensors install
The WiMo and WiMo Plus sondes come with a cap on each sensor location. These caps ensure the
sonde is waterproof. When you remove a cap the sonde is no longer waterproof until you place a
sensor or a cap.
If the WiMo has been immersed in water you must dry the sonde properly before any dismantling.
The plug/unplugged operations of sensors or caps must be done head-down.
To Next Page
Loading...