EasyManuals Logo

NMC-WOLLARD TML-704H User Manual

Default Icon
64 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
PAGE 5-2
CHAPTER 1 GENERAL INFORMATION AND OPERATING INSTRUCTIONS
NMC-WOLLARD
2021 Truax Blvd. Eau Claire, WI 54703 P: 715-835-3151● F: 715-835-6625 www.nmc-wollard.com
TML-704H Maintenance Lift Manual No. 310547
5 STORAGE
5.7 FUEL TANK
To minimize risk of serious injury or death from re or explosion,
before servicing a fuel tank:
Clean the tank thoroughly before soldering or brazing. Fill tank with an inert gas
such as carbon dioxide or nitrogen, or completely ll with water.
Drain and clean the fuel tank. Upon removal from storage, ush tank completely
before relling.
5.8 AXLES
Drain oil and remove access cover from rear axle. Clean inside of di󰀨erential with
a lint-free rag; replace and rell with clean, new oil. Run the axle for 2-5 minutes
to make sure that oil is evenly distributed. Lubricate wheel bearings on both
axles.
5.9 TIRES
Support the vehicle on blocks to take the weight o󰀨 the tires. Reduce tire pressure
to 15 PSI.
5.10 CHASSIS
Thoroughly clean all structural elements and paint or coat with protective grease
on all exposed bare metal. Lubricate all rotating and sliding elements, including
bearings and bushings.
SEPTEMBER 01, 2015
Property of American Airlines

Other manuals for NMC-WOLLARD TML-704H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NMC-WOLLARD TML-704H and is the answer not in the manual?

NMC-WOLLARD TML-704H Specifications

General IconGeneral
BrandNMC-WOLLARD
ModelTML-704H
CategoryLifting Systems
LanguageEnglish