COUPLING
TO THE
TRACTOR
Introducethe
lift
joints, checking that they are at the same
height
in
the lower hitches.
that they are at the same height in the lower hitches.
the
machine to
better
follow
the
undulations
in
case
of long ways with the
double freewheel gearbox unit.
The rotation way
of
machine
is
right, any is
Get up the machine from
the
ground and adjust cutting height
(
working height adjustment
:
page I7
).
Raise foot and
secure
it.
Adjust
machine and elevator attitude by placing
the
machine horizontally
or
slightly higher on
the
rear side
so as
to
make material infeed easier.
To Next Page
Loading...
