Create a walking route
Plan a walking route to a place nearby. You can see the entire route
and all the turnings on the map before setting off.
1. Select maps.
2. Select to see the toolbar, then select > .
3. Select starting location and a place, address, saved favourite, or
a point on the map as the start point of your walking route. To start
from where you are now, select my position.
4. Select destination and the end point of the walking route.
Using ferries and some special tunnels for walking routes is
restricted.
5. Select .
6. When you're ready to get going, select .
Tip: To read a list of each turn along the route, select the next turn
info area at the top of the screen.
80
To Next Page
Loading...
