General Functions
memory with a name, the name will be shown instead.
If your network does not allow you to view the caller’s
phone number:
The text WAITING CALL will be displayed.
To answer the incoming call, press 
~.
 Alternatively:
press and hold the 
Menu 
selection key for a second,
move the pointer to Swap and press the 
OK 
selection key.
The old call is automatically put on hold.
To alternate between the two calls (i.e. put the active call
on hold and make the held call active), press 
_.
Alternatively: Press and hold the 
Menu 
selection key for a
second, move the pointer to Swap and press the 
OK 
se-
lection key.
The text 
SWAPPED is displayed briefly,
If you want to create a conference call, press and hold
the 
Menu 
selection key for a second, move the pointer to
Join and press the 
OK 
selection key.
To end the active call, press and hold the 
Menu 
selection
key for a second, move the pointer to Drop call and press
the 
OK 
selection key. 
_
 will end both of the calls.
To make the held call active, press and hold the 
Menu
selection key for a second, move the pointer to Unhold
and press the 
OK 
selection key.
To answer a call while you have a conference call in
progress:
Press 
_
 to answer the incoming call.
Alternatively: Press and hold the 
Menu 
selection key for a
second, move the pointer to Swap and press the 
OK 
se-
lection key.
The conference call is automatically put on hold.
33