Menu Functions
CALL COSTS LIMIT (Menu 6 3)
This function allows you to limit the total costs of outgoing
calls to a specified number of charging units or units of the
currency that you have set in Menu 6 4.
Emergency calls to the number 112 can be made even if
there are no charging units left.
~
 Press 
Menu 
6 3 
to enter this function.
@
 Key in the PIN2 code and press the OK selection key.
@
  Press the     or      key to select Set (turn limit on) or None
(turn limit off) and press the OK selection key.
@
 If you selected Set, key in the cost limit in charging units
or units of the currency. Pressing the 
#
 or 
✱ 
key will insert
a decimal point.
@
 Press the 
OK 
selection key.
If you activated the cost limit, the quantity of remaining charg-
ing or currency units will be continuously shown on the dis-
play when in idle mode. When all units have been used, no
calls can be made except for emergency calls to the num-
ber 112.
SHOW COSTS IN (Menu 6 4)
Within this submenu you may select whether the call cost
limits will be displayed in currency or charging units. Contact
your network operator for charging unit prices.
~
  Press 
Menu 
6 4 
to enter the function.
@
 Key in the PIN2 code and press the OK selection key.
81