Nokia 2260 - Use 1-Touch Dialing; Set Touch Tone Strings

Nokia 2260 User Guide 67 Copyright © 2003 Nokia
• USE 1-TOUCH DIALING
You can assign a name from your contact list to a 1-touch dial location, using your
phone’s keys 2-9. (The
1
key is used exclusively to dial your voice mailbox.) Once
assigned, the phone number you associate with that key is dialed automatically
when you press and hold the key.
Assign a key to 1-touch dialing
1
Press
Contacts
, scroll to
1-touch dialing
and press
Select
.
2
Scroll to a number that has the message
(empty)
and press
Assign
.
3
Scroll to the name and number to which you want to assign this key and
press
Select
.
Repeat steps 1-3 times as many times as necessary.
4
To call a number using 1-touch dialing, press and hold the appropriate key for
a few seconds.
Change 1-touch dialing numbers
You can change the 1-touch dialing key assignments at any time.
1
Press
Contacts
, scroll to
1-touch dialing
, and press
Select
.
2
Scroll to the key you want to change and press
Options
.
3
Scroll to
Change
and press
Select
.
4
Scroll through the contact list until you reach the new number you want to
select and press
Select
.
Delete 1-touch dialing numbers
You can delete 1-touch dialing key assignments at any time.
1
Press
Contacts,
scroll to
1-touch dialing
and press
Select
.
2
Scroll to the key you want to delete and press
Options
.
3
Scroll to
Delete
, press
Select
, then press
OK
.
• SET TOUCH TONE STRINGS
Your phone allows you to create special sets of numbers known as touch tone
strings which will dial a series of digits after a “wait” or a “pause.” For example,
you can program your phone to send your account number while you are banking
by phone.
2260.ENv1_9355957_.book Page 67 Wednesday, February 26, 2003 11:27 AM