68 Copyright © 2003 Nokia
Advanced calling features
You must be in the mode to enter these characters. Enter the numbers
as usual. When you want to insert the special characters, press
*
repeatedly to
switch among
*
,
+
,
p, w
characters.
Note:
Use caution when sending confidential information, if voice privacy
is not active.
Set manual touch tones
1
Press
Menu
4-3-2-1
(
Settings > Phone settings > Touch tones > Manual
touch tones
).
2
Select one of the following options, then press
Select
:
Continuous:
Sounds tone for as long as you press and hold a key.
Fixed:
Sets the tone length to 0.1 second, regardless of how long you press a key.
Off:
Turns off the tones. No tones are sent.
Set touch tone length
You can also set the length of each touch tone.
1
Press
Menu 4-3-2-2
(
Settings > Phone settings > Touch tones > Touch
tone length
).
2
Use the
Scroll up
or
Scroll down
key to scroll to
Short
or
Long
.
Short sets the tone length to 0.1 second. Long sets the tone length to 0.5 second.
3
Press
Select
.
Character Action
p
Creates a pause when a number is dialed. The numbers you
enter after this special character are automatically sent as
touch tones after a 2.5-second pause.
w
Creates a wait when a number is dialed. This means that
your phone waits for you to press the left selection key
before it sends the number as touch tones.
*
Sends command strings to the network. Contact your
service provider for details.
+
Use this character to link a 1-touch dialing number to a
number in the contact list.
2260.ENv1_9355957_.book Page 68 Wednesday, February 26, 2003 11:27 AM
To Next Page
Loading...
