Connecting the Nokia 32 terminal to a fax machine
23
Copyright
© 2003 Nokia. All rights reserved.
■ Sending faxes
1 Connect the analog fax machine to the Nokia 32 terminal.
2 Dial *01* to inform the Nokia 32 terminal about the fax call.
3 Dial the recipient’s number.
Example: *01*recipient’s number
■ Receiving faxes
Incoming faxes are received in the same way as using a fixed line.
Note: SIM cards usually have a separate number for fax usage. For
incoming faxes, the fax number of the SIM card is used. For information
on using fax services, contact your service provider.
If the Nokia 32 terminal does not receive information about the incoming call type
from the GSM network, dial *01#* to force the Nokia 32 terminal to receive the
next incoming call as a fax call. This temporary setting is deactivated by receiving
a fax or by dialling #01#*.
For the light indicators when waiting for a fax call, see “Light indicators” on
page 25.
■ Configuration
In the Fax connection menu of Nokia 32 Configurator software, you can select to
route incoming fax calls to an analog fax (RJ-11 trunk port, default) or a PC fax
(RS232 port).
Eppu_en1.fm Page 23 Thursday, January 8, 2004 3:48 PM
To Next Page
Loading...
