Nokia 32 - Advanced settings

To Next Page

To Previous Page

Adjusting telephone speaker volume

To adjust the telephone set's speaker volume, key in 0**x during the call. Replace x

with a value between 1 (the lowest volume level) and 10 (the highest volume

level). The default value is 5.

Activating IOF

IoF (Intensity of Field strength) is activated when the terminal is powered up. The

field strength is shown with the terminal LEDs for ten seconds, after which the

feature is automatically deactivated.

■ Advanced settings

To change the advanced settings, you need to activate the configuration mode of

the Nokia 32 terminal.

1 Key in **####**.

2 The terminal prompts for an access code. The default code is 1234. You can

change the code with Nokia 32 Configurator. To enter the access code, key in

AccessCode#.

3 Configure the settings with a normal DTMF telephone. The table below lists the

available settings.

Eppu_en1.fm Page 30 Thursday, January 8, 2004 3:48 PM

Other manuals for Nokia 32