Configuration
31
Copyright
© 2003 Nokia. All rights reserved.
4 Key in 555**# to save the new settings and to restart the terminal.
Feature Command to change
settings
Note
Loop interruption time
[ms]
2**Interruption_Time# The default loop
interruption time is
300 ms
Polarity reversal time
[ms]
3**Polarity_Reversal_
Time#
Calling line
identification (CLI)
mode
4**CLI_Mode# The available modes
are:
000 = ETSI FSK
001 = DTMF
010 = DTMF-DK
Network selection 5**Operator_Code# For automatic
network selection,
enter 000 as the
Operator Code
Extension mode,
outgoing call
6**#
7**#
Mode A (default)
Mode B
Extension mode,
incoming call
8**#
9**Pre-
Defined_Extension_
Number#
Mode A (default)
Mode B
Eppu_en1.fm Page 31 Thursday, January 8, 2004 3:48 PM