Copyright © 2003 Nokia. All rights reserved.
Menu functions
101
Menu functions
• When blinks, your phone is trying to connect to the other device or a connection has been lost.
GPRS
GPRS connection
You can set the phone to automatically register to a GPRS network when you switch the phone on.
Press Menu, and select Connectivity, GPRS, GPRS connection and Always online. Starting a WAP or PC
dial-up application, or sending/receiving multimedia messages creates the connection between phone
and network and data transfer is possible. When you end the application, GPRS connection is ended
but the registration to the GPRS network remains.
If you select When needed, the GPRS connection is established when an application needs it and closed
when you end the application.
GPRS modem settings
You can connect the phone via infrared or data cable connection to a compatible PC and use the phone
as a modem to enable GPRS connectivity from the PC.
Press Menu, and select Connectivity, GPRS and GPRS modem settings. Select Active access point and
activate the access point you want to use. Select Edit active access point to change the access point
settings.
• Scroll to Alias for access point and press Select. Key in the name you would like for the activated
access point and press OK.
• Scroll to GPRS access point and press Select. Key in the Access Point Name (APN) and press OK.
An access point name is needed to establish a connection to a GPRS network. You can obtain the
Access Point Name from your network operator or service provider.
To Next Page
Loading...
