Copyright © 2003 Nokia. All rights reserved.
Menu functions
75
Menu functions
Select the divert option you want, for example, select Divert if busy to divert the voice calls when your
number is busy or when you reject an incoming call.
To set the divert setting to on, select Activate, and then select the timeout after which the call is
diverted, if this is available for the divert option. To set the divert setting to off, select Cancel. To check
whether the call divert is activated or not, select Check status, if this is available for the divert option.
Several divert options may be active at the same time.
To see the divert indicators in standby mode, see Essential indicators on page 21.
Anykey answer
Press Menu, and select Settings, Call settings and then Anykey answer. Select On and you can answer
an incoming call by briefly pressing any key, except , selection keys and , and .
Automatic redial
Press Menu, and select Settings, Call settings and Automatic redial. Select On and your phone will
make a maximum of ten attempts to connect the call after an unsuccessful call attempt.
Speed dialling
Press Menu, and select Settings, Call settings and Speed dialling. Select On and the names and phone
numbers assigned to the speed dialling keys, from to , can be dialled by pressing and
holding the corresponding number key.
Call waiting
Press Menu, and select Settings, Call settings and Call waiting. Select Activate and the network will
notify you of an incoming call while you have a call in progress (network service). See Call waiting on
page 34.
To Next Page
Loading...
