Copyright © 2003 Nokia. All rights reserved.
Menu functions
80
Menu functions
For more information and availability of an operator logo via SMS, MMS or WAP, contact your network
operator and/or WAP service provider, and see also PC Suite on page 117.
Screen saver
Digital clock screen saver is used for power saving in standby mode. It is activated when no function of
the phone has been used for a certain time. Press any key to deactivate the screen saver. Screen saver is
also deactivated when the phone is out of the network coverage area.
Press Menu, and select Settings, Display settings and Screen saver timeout. Select the timeout after
which the digital clock display will be activated. The length of the timeout can vary from 5 seconds to
60 minutes.
Note that the screen saver overrides all the graphics and texts on the display in standby mode.
Display brightness
You can change the display contrast level used on the phone display.
Press Menu, and selectSettings, Display settings and Display brightness. Scroll with and to
decrease and increase the contrast level, and press OK to accept it.
Tone settings
Press Menu, and select Settings and then Tone settings. You can find the same settings in the Profiles
menu, see Profiles (Menu 4) on page 72. Note that the settings you make, change the settings in the
active profile.
Select Incoming call alert to select how the phone notifies you of an incoming voice call. The options
are Ringing, Ascending, Ring once, Beep once and Off.
To Next Page
Loading...
