Copyright © 2003 Nokia. All rights reserved.
Menu functions
81
Menu functions
Select Ringing tone for incoming voice calls. To select ringing tones saved in the Gallery, select Open
gallery from the ringing tone list.
Select Ringing volume and Vibrating alert for incoming voice calls and incoming messages. The
vibrating alert does not work when the phone is connected to a charger, desktop stand, or a car kit.
Tip: If you receive a ringing tone via OTA or by downloading, you can save the ringing tone in
the Gallery.
Select Message alert tone to set the alert tone for the incoming messages, Keypad tones, or Warning
tones to set the phone to sound tones for example, when the battery is running out of power.
Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected
caller group. Scroll to the caller group you want or All calls and press Mark.
Accessory settings
Accessory settings menu is shown only if the phone is or has been connected to one of the following
accessories: headset HDB-4, handsfree unit CARK126, or mobile inductive loopset LPS-4.
Press Menu, and select Settings and Accessory settings. You can select Headset, Handsfree or Loopset
if the corresponding accessory is or has been connected to the phone.
• Select Default profile to select the profile you want to be automatically activated when you
connect the selected accessory. You can select another profile while the accessory is connected.
• Select Automatic answer to set the phone to answer an incoming call automatically after five
seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be in use.
• Select Lights to set the lights permanently On. Select Automatic to set the lights on for 15 seconds
after a keypress. The Lights option is available only when Handsfree is selected.
To Next Page
Loading...
