Copyright © 2003 Nokia. All rights reserved.
PC Connectivity
119
PC Connectivity
■ Using data communication applications
For information on using a data communication application, refer to the documentation provided with
it.
1. If you use IR connection:
• Activate the IR connection in the phone, see Infrared on page 100. Make sure that the
connection is active in your PC.
If you use the connectivity adapter cable DKU-5:
• Connect the cable to the USB port on the back of your computer and to the connector on your
phone.
2. Start using the data communications application on the computer.
Note that making or answering phone calls during a computer connection is not recommended as it
might disrupt the operation.
For better performance during data calls, place the phone on a stationary surface with the keypad
facing downward. Do not move the phone by holding it in your hand during a data call.
To Next Page
Loading...
