Copyright © 2003 Nokia. All rights reserved.
Menu functions
106
Menu functions
Making a connection to a WAP service
Firstly, make sure that the service settings of the WAP service you want to use are activated. To
activate the settings:
•Press Menu, and select Services and Settings. Select Active service settings and scroll to the set you
want to activate and press Activate.
Secondly, make a connection to the WAP service. There are three ways to connect:
• Open the homepage of the WAP service:
Press Menu, and select Services and Home.
Tip: To quickly open the homepage, press and hold in standby mode.
OR
• Select a bookmark of the WAP service:
Press Menu, and select Services, Bookmarks, and select a bookmark.
If the bookmark does not work with the current active service settings, activate another set of
service settings and try again.
OR
• Key in the address of the WAP service:
Press Menu, and select Services and then Go to address. Key in the address of the WAP service, press
for special characters, and press OK.
Note that it is not necessary to add the prefix http:// in front of the address since it will be added
automatically.
To Next Page
Loading...
