Copyright © 2003 Nokia. All rights reserved.
Menu functions
105
Menu functions
• Data call speed - Select the speed you want to use, or select Automatic. Automatic is available only
if the current selected data call type is Analogue. The actual data call speed depends on the service
provider.
• Login type - Select Manual or Automatic.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
Settings when GPRS is the selected data bearer
• GPRS access point - Key in the access point name and press OK.
An access point name is needed to establish a connection to a GPRS network. You obtain the access
point name from your network operator or service provider.
• IP address - Key in the address, press for a dot , and press OK. You obtain the IP address from
your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Login type - Select Manual or Automatic. If you select Automatic, the login type uses the user name
and password keyed in the following settings. If you select Manual, the login information is
required when establishing a connection.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
To Next Page
Loading...
