©2001 Nokia Mobile Phones. All rights reserved. 31
Message encoding (Menu 2 4 1 4 - 2 4 3 4)
This menu function allows you to set the messages encoding On or
Off and to change the key used for encoding. You can either use the
encoding key provided with your phone or use the phone’s default
encoding key.
1. Use the and keys to select the encoding On or Off.
2. If you select encoding to be On, the submenus
Default key, New
key
(and Current key, if the key has been entered earlier) appear
on the display. Use the and keys to select the desired
option.
3. You can either accept the use of the default key or current key
with OK or key in a new key and then press OK to
accept it. A code error message appears on the display if you
entered an incorrect code. (The code can be a maximum of 10
digits and it cannot be all zeros.)
Note: Network support of message encoding may vary,
which cannot guarantee message encoding in all
conditions, even when this feature is enabled.
Local laws may apply to encoding messages. Do not use this
feature illegally.
Retrieve messages (Menu 2 5)
This menu function is needed only when you are in a country where
the local network operator does not support the SMS function. It
allows you to retrieve your SMS messages from your own operator’s
service centre or some other service centre by placing a call to that
particular service centre. You can save different settings, according
to the service centre numbers in different sets.
When you wish to retrieve messages, your phone suggests a list of
saved sets. You can scroll through the list with the and keys
and select a suitable set with OK.
After successful retrieval of a message, the indicator appears
on the display.
To Next Page
Loading...
