14
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to
the charger connector at the top of
your phone.
If the battery is completely discharged, it
may take a few minutes before the charging
indicator appears on the display or before
any calls can be made.
■ Switch the phone on and off
1. Press and hold the power key as shown.
2. If the phone asks for a PIN or a UPIN code, enter
the code (for example, displayed as ****), and
select OK.
When you switch on your phone for the first time,
and the phone is in the standby mode, you are asked
to get the configuration settings from your service
provider (network service). Confirm or decline the
query. See "Configuration," p. 45, and "Configuration
settings service," p. 15.
■ Set the time, zone, and date
When you switch on your phone for the first time, and the phone is in the
standby mode, you are asked to set the time and date. Fill in the fields, and
select Save.
To access Date and time later, select Menu > Settings > Date and time >
Date & time settings, Date and time format, or Auto-update of time (network
service) to change the time, time zone, and date settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
