53
Settings — to change the Radio Data System (RDS) settings, select RDS
on or RDS off. When RDS is on, you can select Auto-freq. change on to
change to another frequency containing the same radio station when the
original signal becomes weak.
Station directory — to open the Visual Radio services using a web link to
a radio station guide.
Visual Radio — to set whether the Visual Radio application is used.
Some radio channels may send text or graphical information that you
can view using Visual Radio.
Enable visual service — to set whether the Visual Radio application starts
automatically when you turn on the radio.
You can normally make a call or answer an incoming call while listening to
the radio. During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is sending or
receiving data, it may interfere with the radio.
■ Voice recorder
You can record pieces of speech, sound, or an active call, and save them in
Gallery. This is useful when recording a name and phone number to write
down later.
The recorder cannot be used when a data call or GPRS connection is active.
1. Select Menu > Media > Voice recorder.
To use the graphical keys , , or on the display, scroll left or right
to the desired key, and select it.
To Next Page
Loading...
