7190 User Guide v0.043/15/99 [ 47 ]
Phone Book
Note:You can set the phone to ring only upon calls from names &
numbers that belong to a specific caller group. See “Profiles” on page28.
Adding a name & phone number to a caller group
1 Once you have recalled the desired name and number from the phone
book, press
Options.
2 Scroll to
Caller groups, and press Roller.
3 Scroll to the desired caller group, for example
Family, and press
Roller.
Setting a ringing tone & graphic for a caller group
1 Press Names.
2 Scroll to
Caller groups and press Roller.
3 Scroll to one of the caller groups and press Roller.
4 Scroll to one of the following functions and press Roller.
Rename group
Enter the new name for the caller group and press OK.
Group ringing tone
Scroll to the desired tone and press OK. Preset is the tone selected
for the currently selected profile.
Group graphic
Scroll to On, Off, View graphic, Send via IR, Send
graphic (send via SMS), and press OK.
5 If you selected
Send graphic (network service), enter the
recipient’s phone number or recall it from phone book and press
OK.
You can also download a new graphic to your phone via the IR port.
See “Infrared” on page77 for information about receiving data via IR.
After you have downloaded a graphic, scroll to
View graphic or
Save graphic and press OK. If you selected Save graphic, reach
the desired caller group and press
OK.
To Next Page
Loading...
