Nokia 7190 - SIM Card Security

7190 User Guide v0.043/15/99 [ 69 ]
Settings
5 At Dialing sequence, press Select. Scroll to the dialing
sequence your card uses, then press
Select.
6 Enter access number (usually the 1-800 number listed on the back of
the calling card), then press
OK.
7 Enter your card number and/or PIN, then press
OK. Your phone displays
Save changes? Press OK.
8 Scroll to
Card name, then press Select. Enter the card name using
your phone’s keypad, then press
OK.
Note:This procedure might not work with all calling cards. Please look at
the back of your calling card or contact your long distance company for
more information.
Choosing a calling card to use
Use Menu 4-2-7 to select a calling card to use. You will be required to
enter your security code.
Dialing sequence Use for cards that
require you to:
Cards using
this sequence
Access number
+ phone number
+ card number
Dial 1-800 access number,
then phone number, then
card number (+ PIN if
required)
MCI, AT&T True
Choice, Sprint
Canada, Unitel
Access number
+ card number
+ phone number
Dial 1-800 access number,
then card number (+ PIN if
required), then phone number
networkMCI,
WorldPhone
MCI
Prefix
+ phone number
+ card number
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (+PIN if required)
GTE, PacBell,
AT&T, Stentor