Nokia 7600 - Certificates

Menu functions
143
Copyright
© 2003 Nokia. All rights reserved.
• Module PIN request to set the phone to ask for the module PIN code when
using services provided by the security module. Key in the code and select On.
To disable this request, select Off.
• Change module PIN to change the module PIN code, if allowed by the security
module. Enter the current module PIN code and then enter the new code twice.
See also Access codes on page 15.
Certificates
There are three kinds of certificates: server certificates, authority certificates and
user certificates.
To view the available certificates, press Menu in standby mode and select
Services, Settings, Security settings and User certificates or Authority certificates.
• Server certificates
The phone uses a server certificate to improve security in the connection
between the phone and the gateway. The phone receives the server certificate
from the service provider before the connection is established and its validity is
checked using the authority certificates saved in the phone. Server certificates
are not saved.
The security indicator is displayed during a connection, if the data
transmission between the phone and the Internet server is encrypted.
However, the security indicator does not indicate that the data transmission
between the gateway and the content server (place where the requested
resource is saved) is secure. It is up to the service provider to secure the data
transmission between the gateway and the content server.