Nokia 7600 - Tone Settings

Menu functions
99
Copyright
© 2003 Nokia. All rights reserved.
active, a digital clock moves from the top to the bottom of the display and the
rest of the display is blank.
Select the time-out from the available values, or select Other and set the value.
You can deactivate the screen saver by pressing any key.
Tone settings
You can change the tone and vibrator settings of the currently selected profile.
The same settings can also be found in the Profiles menu, see page 90.
To access this menu: Press Menu in standby mode, and select Settings and Tone
settings. Select
• Incoming call alert to choose how the phone notifies you of an incoming voice
call. The options are Ringing, Ascending, Ring once, Beep once and Off.
For example, if you select Off, the phone remains silent when you receive a call.
• Ringing tone to select the tone that rings when you receive a voice call. If you
want to select a tone, for example an MP3 file, saved in the Gallery menu,
select Open gallery from the tone list.
• Ringing volume to select the volume level for the ringing tones and message
alert tones.
• Vibrating alert to set the phone to vibrate when you receive a call or message.
The vibrating alert does not work when the phone is connected to a charger,
desktop stand or car kit.