Menu functions
71
Copyright
© 2003 Nokia. All rights reserved.
Keying in the e-mail settings manually
You may receive the e-mail connection settings as an Over The Air (OTA) message
from the e-mail service provider. You can also key in the settings manually.
1. Press Menu in standby mode and select Messages, E-mail, Open, Other options
and Settings.
2. Select Mailbox in use and the mailbox whose settings you want to edit. These
settings are needed for sending and retrieving e-mail messages. For the correct
settings, contact your e-mail service provider.
3. Select Edit active mailbox and define the settings one by one.
• Mailbox name: Key in the name that you want to use for the mailbox.
• E-mail address: Key in your e-mail address.
• My name: Key in your name or nickname if you want the recipient to see it.
• Outgoing (SMTP) server: Key in the address of the outgoing e-mail server.
• Incoming server type: Select POP3 or IMAP4. If the server supports both
types, select IMAP4. Changing the server type also changes the port
number for incoming e-mail.
• Incoming (POP3/IMAP) server: Key in the address of the incoming e-mail
server.
• POP3/IMAP user name: Key in the user name that is needed to access the
mailbox. If you have not defined your SMTP user name, the e-mail server
uses this user name instead.
To Next Page
Loading...
