Pay-As-You-Grow Licensing
22
PAY-AS-YOU-GROW FP4 HARDWARE LICENSING
REFERENCE GUIDE
3HE 15453 AAAA TQZZA 01 Issue: 02
The following two examples show restrictions for different levels of a QSFP-DD XMA:
A:bkvm19# show licensing 1/1
===============================================================================
Connector MAC Licensed Restrictions
-------------------------------------------------------------------------------
1/1/c1 1 Yes Breakout limited to 100 Gbps
1/1/c2 1 Yes Breakout limited to 100 Gbps
1/1/c3 1 Yes Breakout limited to 100 Gbps
1/1/c4 2 Yes Breakout limited to 100 Gbps
1/1/c5 2 Yes Breakout limited to 100 Gbps
1/1/c6 2 Yes Breakout limited to 100 Gbps
1/1/c7 3 Yes Breakout limited to 100 Gbps
1/1/c8 3 Yes Breakout limited to 100 Gbps
<snip>
A:bkvm19# show licensing 2/1
===============================================================================
Connector MAC Licensed Restrictions
-------------------------------------------------------------------------------
2/1/c1 1 Yes 300 Gbps per MAC Chip
2/1/c2 1 Yes 300 Gbps per MAC Chip
2/1/c3 1 Yes 300 Gbps per MAC Chip
2/1/c4 2 Yes 300 Gbps per MAC Chip
2/1/c5 2 Yes 300 Gbps per MAC Chip
2/1/c6 2 Yes 300 Gbps per MAC Chip
2/1/c7 3 Yes 300 Gbps per MAC Chip
2/1/c8 3 Yes 300 Gbps per MAC Chip
<snip>
3.1.3 FP4 Assembly Upgrading
The provisioned level of an assembly can be upgraded using a software license.
Once the software license is applied to an assembly, the assembly will operate at the
level of the upgrade, which unlocks more ports, bandwidth, or functionality, or a
combination. Multiple upgrades can be applied to the same assembly, which allows
any of the cards to be upgraded to any of the higher levels.
Figure 9 and Figure 10 show the same XMA as in the Figure 8 example but with two
upgrades applied to move it from the cr1600g level to the er2400g level.
To Next Page
Loading...
