PAY-AS-YOU-GROW FP4 HARDWARE LICENSING 
REFERENCE GUIDE
Pay-As-You-Grow Licensing
Issue: 02 3HE 15453 AAAA TQZZA 01  21
 
Figure 8 XMA Configuration
3.1.2 Viewing FP4 Assembly Restrictions
The SR OS has been enhanced to provide information about the operational 
restrictions for a particular FP4 card. These restrictions cover both the capacity and 
the functional level restrictions.
For hardware capacity, the show licensing card-slot/mda-slot command can be 
used to see what restrictions are being applied at the connector and E4 levels.
The following example shows restrictions for a QSFP28 XMA:
*A:bkvm18>config>card>mda# show licensing 1/1
===============================================================================
Connector MAC Licensed Restrictions
-------------------------------------------------------------------------------
1/1/c1 1 Yes None
1/1/c2 1 Yes None
1/1/c3 1 Yes None
1/1/c4 1 Yes None
1/1/c5 1 No No Breakout Allowed
1/1/c6 1 No No Breakout Allowed
1/1/c7 2 Yes None
1/1/c8 2 Yes None
1/1/c9 2 Yes None
1/1/c10 2 Yes None
1/1/c11 2 No No Breakout Allowed
1/1/c12 2 No No Breakout Allowed
1/1/c13 3 Yes None
<snip>
sw0881
configure card mda mda-type <mda-type> level <mda-level>
*A:bkvml8>config>card>mda# mda-type “s36-100gb-qsfp28” level <tab>
level <mda-level>
“he2400g+”    “he2400g”    “he1600g”    “er2400g+”    “er2400g”    “er1600g”
*A:bkvm18>config>card>mda# show mda 1/1 detail
MDA 1/1 detail
Slot   Mda    Provisioned Type    Admin    Operational
          Equipped Type (if different)  State  State
1   1  s36-100gb-qsfp28:cr1600g  up  up
MDA Licensing Data
    Licensed Level                  : cr1600g
  Description                     : 1.6T, 16p, Core Routing
CLI presents options available based on the mda-type