RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 131
26-6527-165 Alc-Dyn-Serv-Script-
Params
Parameters as input to the Dynamic Data Service Python script. The
parameters can cross an attribute boundary. The concatenation of all
[26-6527-165] Alc-Dyn-Serv-Script-Params attributes with the same tag
in a single message must be formatted as function-key dictionary where
function-key specifies which Python functions will be called and
dictionary contains the actual parameters in a Python dictionary
structure format. In dynamic service RADIUS accounting messages,
the attribute is sent untagged and contains the last received [26-6527-
165] Alc-Dyn-Serv-Script-Params value in an Access-Accept or CoA
message for this dynamic service. Multiple attributes may be present if
the total length does not fit a single attribute.
26-6527-166 Alc-Dyn-Serv-Script-
Action
The action specifies if a dynamic data service should be created
(setup), changed (modify) or deleted (teardown). Together with the
function-key in the [26-6527-165] Alc-Dyn-Serv-Script-Params, this
attribute determines which Python function will be called.The attribute is
mandatory in a CoA message. The attribute is optional in an Access-
Accept message. If included in an Access-Accept and the specified
action is different from setup, the dynamic data service action fails.
26-6527-167 Alc-Dyn-Serv-Policy Specifies the local configured Dynamic Data Service Policy to use for
provisioning of this dynamic service. If the attribute is not present, the
dynamic services policy with the name default is used. If the default
policy does not exist, then the dynamic data service action fails.The [26-
6527-167] Alc-Dyn-Serv-Policy attribute is optional in case of modify or
teardown actions; the policy specified for the dynamic data service
setup is automatically used. If the [26-6527-167] Alc-Dyn-Serv-Policy is
specified for modify or teardown actions, it must point to the same
dynamic services policy as used during the dynamic data service setup.
If a different policy is specified, the action fails.
26-6527-168 Alc-Dyn-Serv-Acct-
Interim-Ivl-1
The number of seconds between each dynamic data service accounting
interim update for the primary accounting server. Overrides local
configured value in the Dynamic Services policy. With value = 0, the
interim accounting to the primary accounting server is switched off.The
dynamic data service accounting interim interval cannot be changed for
an active service. The attribute is rejected if the script action is different
from setup
26-6527-169 Alc-Dyn-Serv-Acct-
Interim-Ivl-2
The number of seconds between each dynamic data service accounting
interim update for the duplicate accounting server. Overrides local
configured value in the Dynamic Services policy. With value = 0, the
interim accounting to the duplicate accounting server is switched
off.The dynamic data service accounting interim interval cannot be
changed for an active service. The attribute is rejected if the script
action is different from setup
Table 39 Dynamic Data Services (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
