RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 137
Notes:
1. Only one of Acct-Session-Id or Nas-Port-Id is mandatory as key in a CoA message to identify the
dynamic data service sap
2. CoA rejected (NAK) if not specified (Error Cause: 402 - Missing Attribute)
3. CoA rejected (NAK) if specified (Error Cause: 405 - Unsupported Service)
Table 44 lists the mandatory/optional attributes in CoA messages sent to a dynamic
services data trigger using the Acct-Session-Id of the data trigger as CoA key.
Alc-Dyn-Serv-SAP-
Id
N/S O O If specified, the sap-id must be the same as the
Nas-Port-Id or correspond with the dynamic
service sap identified with the Acct-Session-Id.
Alc-Dyn-Serv-
Script- Params
N/S
M
2
N/A For a Modify, the Script Parameters represent the
new parameters required for the change.
Alc-Dyn-Serv-
Script- Action
N/S
M
2
M
2
Alc-Dyn-Serv-
Policy
N/S O O Must be same as used for setup if specified for
Modify or Teardown.
Alc-Dyn-Serv-Acct-
Interim-Ivl-1
N/S
X
3
X
3
Alc-Dyn-Serv-Acct-
Interim-Ivl-2
N/S
X
3
X
3
Alc-Dyn-Serv-Acct-
Stats-Type-1
N/S
X
3
X
3
Alc-Dyn-Serv-Acct-
Stats-Type-2
N/S
X
3
X
3
M = Mandatory, O = Optional, X = May Not, N/A = Not Applicable (ignored), N/S = Not Supported
Table 43 Data Triggered Dynamic Services (CoA Key = Nas-Port-Id or Acct-Session-Id of
Dynamic Data Service SAP) - CoA Attributes (Continued)
Attribute Name Setup Modify Teardown Comment
Table 44 Data Triggered Dynamic Services (CoA Key = Acct-Session-Id of Dynamic Service
Data Trigger) - CoA Attributes
Attribute Name Setup Modify Teardown Comment
Acct-Session-Id M M M (CoA key) Acct-Session-Id of a dynamic service
data trigger.
Alc-Dyn-Serv-SAP-
Id
M
1
M
1
M
1
Identifies the dynamic data service associated
with the dynamic service data trigger.
To Next Page
Loading...
