RADIUS Attributes Reference
168
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
31 Calling-Station-Id Allows the NAS to send unique information identifying the user who
requested the service. This format is driven by configuration (configure
subscriber-mgmt radius-accounting-policy name include-radius-
attribute calling-station-id <llid | mac | remote-id | sap-id | sap-
string>). The LLID (logical link identifier) is the mapping from a physical
to logical identification of a subscriber line and supplied by a RADIUS
llid-server. The sap-string maps to configure service ies | vprn
service-id subscriber-interface ip-int-name group-interface ip-int-
name sap sap-id calling-station-id sap-string. A [31] Calling-Station-Id
attribute value longer than the allowed maximum is treated as a setup
failure. The attribute is omitted in accounting via configure subscriber-
mgmt radius-accounting-policy name include-radius-attribute no
calling-station-id.
For DSM the Calling-Station-Id is always equal to the remote-id if
present and the UE MAC address otherwise.
32 NAS-Identifier A string (configure system name system-name) identifying the NAS
originating the Accounting requests and sent when nas-identifier is
included for the corresponding application: configure subscriber-
mgmt radius-accounting-policy (ESM accounting), configure aaa
isa-radius-policy (LSN accounting, WLAN-GW) and configure aaa
l2tp-accounting-policy (L2TP accounting).
40 Acct-Status-Type Indicates whether this Accounting-Request marks the beginning of the
user service (Start) or the end (Stop) or reports interim updates.
41 Acct-Delay-Time Indicates how many seconds the client has been trying to send this
accounting record for. In initial accounting messages this attribute is
included with value 0 for ESM and omitted for DSM. Attribute is omitted
in accounting via configure subscriber-mgmt radius-accounting-
policy name include-radius-attribute no acct-delay-time.
42 Acct-Input-Octets Indicates how many octets have been received from the user over the
course of this service being provided and included when standard
accounting attributes are configured. (configure subscriber-mgmt
radius-accounting-policy
name include-radius-attribute std-acct-
attributes). [52] Acct-Input-Gigawords indicates how many times (if
greater than zero) the [42] Acct-Input-Octets counter has wrapped
around 2^32.
43 Acct-Output-Octets Indicates how many octets have been sent to the user over the course
of this service being provided and included when standard accounting
attributes are configured. (configure subscriber-mgmt radius-
accounting-policy name include-radius-attribute std-acct-
attributes). [53] Acct-Output-Gigawords indicates how many times (if
greater than zero) the [43] Acct-Output-Octets counter has wrapped
around 2^32.
Table 62 Enhanced Subscriber Management Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
