RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 191
26-6527-94 Alc-Acct-OC-O-
Outpr-Octs-Drop_64
HSMDA override counter: counts egress dropped bytes
• no queue stat-mode:
Count out-of-profile bytes (IPv4 and IPv6)
[26-6527-127] Alc-Acct-O-statmode VSA not included
• queue stat-mode = v4-v6:
Count IPv6 bytes (in- and out-of-profile)
[26-6527-127] Alc-Acct-O-statmode VSA included with value
v4-v6
Up to eight hsmda-counter-override counters can be specified in CLI
(configure qos sap-egress policy-id prec | dscp | ip-criteria | ipv6-
criteria).
26-6527-99 Alc-Ipv6-Address The ipv6 address to be configured to the WAN side of the user
(IPoE,PPPoE) via DHCPv6 (IA-NA). Maps to DHCPv6 option IA-NA[3]
sub-option IA-Address[5] address. This attribute is an alternative to [97]
Framed-IPv6-Prefix and [100] Framed-IPv6-Pool, which also assigns
IPv6 addressing to the wan-side of a host via SLAAC or DHCPv6 IA-NA.
Attribute is omitted in accounting via configure subscriber-mgmt
radius-accounting-policy name include-radius-attribute no ipv6-
address.
For Distributed Subscriber Management (DSM), if IA-NA is active for a
UE, the attribute contains the address assigned to this UE. Inclusion of
this attribute is enabled via configure aaa isa-radius-policy policy-
name acct-include-attributes ipv6-address.
26-6527-100 Alc-Serv-Id DSM only. The attribute contains the service ID where the Layer 3
tunnel is terminated. The attribute is omitted in case of a Layer 2 tunnel
or if the service ID is not known.
26-6527-102 Alc-ToServer-Dhcp-
Options
DSM only. The attribute contains all dhcpv4 options received in the last
DHCPv4 message. Each dhcpv4 option is stored in a separate attribute.
Table 62 Enhanced Subscriber Management Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
