RADIUS Attributes Reference
192
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
26-6527-107 Alc-Acct-I-statmode Identifies what ingress counters the operator wishes to maintain for the
policer and defined by configure qos sap-ingress policy-id policer
policer-id stat-mode stat-mode. The default stat-mode is minimal and
the full list of stat-modes can be found in the Quality of Service Guide.
For both policers and queues, the ingress stat-mode can be configured
to v4-v6 at the sla-profile or sub-profile (hsmda) CLI context. Example:
configure subscriber-mgmt sla-profile sla-profile-name ingress qos
policy-id queue queue-id stat-mode v4-v6
With ingress stat-mode v4-v6:
• Ingress forwarded/dropped counters are reporting IPv4
counters in the in-profile attributes and IPv6 counters in the
out-of-profile attributes.
• The Alc-Acct-I-statmode VSA is included with value v4-v6 for
both queues and/or policers.
26-6527-108 Alc-Acct-I-Hiprio-
Octets_64
Policer-specific counter. Indicates how many policer ingress-forwarded-
bytes have been handled for this user over the course of this service
being provided.
• stat-mode = *(specific stat-mode only):
ingress forwarded high-priority bytes
• stat-mode = v4-v6:
ingress forwarded IPv4 bytes (in- and out-of-profile)
The attribute is included in accounting via configure subscriber-mgmt
radius-accounting-policy name include-radius-attribute detailed-
acct-attributes for specific policer stat-mode only.
26-6527-109 Alc-Acct-I-Lowprio-
Octets_64
Policer-specific counter. Indicates how many policer ingress-forwarded-
bytes have been handled for this user over the course of this service
being provided.
• stat-mode = *(specific stat-mode only):
ingress forwarded low-priority bytes
• stat-mode = v4-v6:
ingress forwarded IPv6 bytes (in- and out-of-profile)
The attribute is included in accounting via configure subscriber-mgmt
radius-accounting-policy name include-radius-attribute detailed-
acct-attributes for specific policer stat-mode only.
Table 62 Enhanced Subscriber Management Accounting (Description) (Continued)
Attribute ID Attribute Name Description