RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 195
26-6527-117 Alc-Acct-O-All-
Octets_64
Policer-specific counter. Indicates how many policer egress-forwarded-
bytes have been handled for this user over the course of this service
being provided. The attribute is included in accounting via configure
subscriber-mgmt radius-accounting-policy name include-radius-
attribute detailed-acct-attributes for specific policer stat-mode only.
26-6527-118 Alc-Acct-I-All-
Packets_64
Policer-specific counter. Indicates how many policer ingress-forwarded-
packets have been handled for this user over the course of this service
being provided. The attribute is included in accounting via configure
subscriber-mgmt radius-accounting-policy name include-radius-
attribute detailed-acct-attributes for specific policer stat-mode only.
26-6527-119 Alc-Acct-O-All-
Packets_64
Policer-specific counter. Indicates how many policer egress-forwarded-
packets have been handled for this user over the course of this service
being provided. The attribute is included in accounting via configure
subscriber-mgmt radius-accounting-policy name include-radius-
attribute detailed-acct-attributes for specific policer stat-mode only.
26-6527-121 Alc-Nat-Port-Range This attribute is used to report allocated or released NAT resources for
a L2aware NAT subscriber. The reported NAT resources include a
public IPv4 address, a public port range, an outside routing instance
and a nat-policy name.
This attribute is included in accounting by configuring the nat-port-
range option under the configure subscriber-mgmt radius-
accounting-policy name include-radius-attributes CLI hierarchy.
26-6527-127 Alc-Acct-O-statmode Identifies what egress counters the operator wishes to maintain for the
policer and defined by configure qos sap-egress policy-id policer
policer-id stat-mode stat-mode. The default stat-mode is minimal and
the full list of stat-modes can be found in the Quality of Service Guide.
For both policers and queues, the egress stat-mode can be configured
to v4-v6 at the sla-profile or sub-profile (hsmda queues only) CLI
context. Example: configure subscriber-mgmt sla-profile sla-profile-
name egress qos policy-id queue queue-id stat-mode v4-v6
With egress stat-mode v4-v6:
• Egress forwarded/dropped counters are reporting IPv4
counters in the in-profile attributes and IPv6 counters in the
out-of-profile attributes.
• The Alc-Acct-O-statmode VSA is included with value v4-v6
for both queues and/or policers.
26-6527-140 Alc-Nat-Outside-
Serv-Id
DSM Only. For a DSM UE this attribute includes the service ID of the
outside VRF where IPv4 traffic will be forwarded after NAT.
26-6527-141 Alc-Nat-Outside-Ip-
Addr
DSM Only. For a DSM UE this attribute contains the IPv4 address of the
UE after NAT.
Table 62 Enhanced Subscriber Management Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
