RADIUS Attributes Reference
196
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
26-6527-148 Alc-RSSI Received Signal Strength Indication. Used in conjunction with the
radius-proxy track-accounting feature. When the radius-proxy receives
this attribute in an accounting message, it will be copied into the DHCP
lease state and echoed by the SROS accounting.
26-6527-149 Alc-Num-Attached-
UEs
Indicates the total number of UEs that are currently attached to the
tunnel of the UE for which the accounting message is generated. In an
accounting stop message this counter includes the UE for which the
accounting stop is generated, even if the UE is being removed.
Therefore the reported counter can only be zero for non-wlan-gw/
vRGW UEs. Inclusion can be configured with the option wifi-num-
attached-ues. For ESM in configure subscriber-mgmt radius-
accounting-policy name include-radius-attribute, and for DSM in
configure aaa isa-radius-policy name acct-include-attributes.
26-6527-163 Alc-Acct-Triggered-
Reason
A reason attribute included in Acct-Interim messages to specify the
reason for the interim update. Attribute is omitted in accounting via
configure subscriber-mgmt radius-accounting-policy name
include-radius-attribute no alc-acct-triggered-reason.
26-6527-175 Alc-DSL-Line-State Status of the DSL line obtained via ANCP can be one of three value:
SHOWTIME (the modem is ready to transfer data), IDLE (line is idle) or
SILENT (line is silent). Attribute is included/excluded based on
configure subscriber-mgmt radius-accounting-policy name
include-radius-attribute access-loop-options.
26-6527-176 Alc-DSL-Type Type of the DSL line (ADSL1, ADSL2, ADSL2PLUS, VDSL1, VDSL2,
SDSL, other) obtained via ANCP.
Attribute is included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options.
26-6527-184 Alc-Wlan-Ue-
Creation-Type
DSM Only. Indicates if the UE is either an ESM host (IOM) or DSM host
(ISA). Fixed to ISA in case of DSM.
26-6527-191 Alc-ToServer-Dhcp6-
Options
DSM Only. If IA-NA is active, the attribute contains the options sent by
the client in the last DHCPv6 transaction. Inclusion of this attribute is
enabled via configure aaa isa-radius-policy policy-name acct-
include-attributes dhcp6-options.
Table 62 Enhanced Subscriber Management Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
