RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 231
30 Called-Station-Id Holds information to which nat-group and nat-member the NAT user
belongs. The format of this attribute is a string 00-00-00-00-NatGroup-
NatMember. The command show isa nat-group holds the link between
ms-isa mda, NatGroup and NatMember. Optionally sent when called-
station-id is included under configure aaa isa-radius-policy policy-
name acct-include-attributes.
32 NAS-Identifier A string (configure system name system-name) identifying the NAS
originating the Authentication or Accounting requests and sent when
nas-identifier is included for the corresponding application: configure
subscriber-mgmt radius-accounting-policy (ESM accounting),
configure aaa isa-radius-policy (LSN accounting, WLAN-GW) and
configure aaa l2tp-accounting-policy (L2TP accounting).
42 Acct-Input-Octets Indicates how many Layer 3 octets have been sent to this nat user over
the course of this service being provided and send together with [43]
Acct-Output-Octets, [52] Acct-Input-Gigawords and [53] Acct-Output-
Gigawords when octet-counters is included under configure aaa isa-
radius-policy policy-name acct-include-attributes.
43 Acct-Output-Octets Indicates how many L3 octets have been received from this nat user
over the course of this service being provided and send together with
[42] Acct-Input-Octets, [52] Acct-Input-Gigawords and [53] Acct-Output-
Gigawords when octet-counters is included under configure aaa isa-
radius-policy policy-name acct-include-attributes.
44 Acct-Session-Id This unique 16 bytes attribute has two different behaviors. If multi-
session-id is not included under configure aaa isa-radius-policy
policy-name acct-include-attributes then multiple port-ranges for the
same user are all reported with a common 16 bytes [44] Acct-Session-
id for the different port-ranges and reported via start, interim and stop
accounting messages and without attribute [50] Acct-Multi-Session-Id.
If multi-session-id is configured under configure aaa isa-radius-
policy policy-name acct-include-attributes then multiple port-ranges
for the same user are reported with different 16 bytes [44] Acct-Session-
id via start and stop accounting messages with an additional common
16 bytes attribute [50] Acct-Multi-Session-Id. For an accounting-on and
accounting-off the first 8 bytes from the 16 bytes are put to zero.
46 Acct-Session-Time Reports the elapsed time in seconds the user has allocated a unique
port-range in accounting start, interim or stop. For accounting-off it
reports the elapsed time in second since the last accounting-on.
47 Acct-Input-Packets Indicates how many packets have been send for this nat user over the
course of this service being provided and send together with [48] Acct-
Output-Packets when frame-counters is included under configure
aaa isa-radius-policy policy-name acct-include-attributes.
Table 69 LSN Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
