RADIUS Attributes Reference
232
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
48 Acct-Output-Packets Indicates how many packets have been received for this nat user over
the course of this service being provided and send together with [47]
Acct-Input-Packets when frame-counters is included under configure
aaa isa-radius-policy policy-name acct-include-attributes.
49 Acct-Terminate-
Cause
Indicates why a specific NAT port-range is released in Acct-Stop
messages. Cause host-Request is used If the last port-range for this
NAT user is freed and cause port-unneeded is used when we release a
port-range which is not the last one (multiple port-ranges) for this NAT
user. Cause [10]Nas-request is reported in Accounting-Off and cause
[11]Nas-reboot is reported in Accounting-on. This attribute is only send
when release-reason is included under configure aaa isa-radius-
policy policy-name acct-include-attributes.
50 Acct-Multi-Session-Id This unique 16 bytes attribute has two different behaviors. If multi-
session-id is not included under configure aaa isa-radius-policy
policy-name acct-include-attributes then multiple port-ranges for the
same user are all reported with a common 16 bytes [44] Acct-Session-
id for the different port-ranges and reported via start, interim and stop
accounting messages and without attribute [50] Acct-Multi-Session-Id.
If multi-session-id is included under configure aaa isa-radius-policy
policy-name acct-include-attributes then multiple port-ranges for the
same user are reported with different 16 bytes [44] Acct-Session-id via
start and stop accounting messages with an additional common 16
bytes attribute [50] Acct-Multi-Session-Id.
52 Acct-Input-
Gigawords
Indicates how many times (zero or more) the [42] Acct-Input-Octets
counter has wrapped around 2^32 in the course of delivering this
service and send together with [42] Acct-Input-Octets, [43] Acct-Output-
Octets and [53] Acct-Output-Gigawords when octet-counters is
included under configure aaa isa-radius-policy policy-name acct-
include-attributes.
53 Acct-Output-
Gigawords
Indicates how many times (zero or more) the [43] Acct-Output-Octets
counter has wrapped around 2^32 in the course of delivering this
service and send together with [42] Acct-Input-Octets, [43] Acct-Output-
Octets and [52] Acct-Input-Gigawords when octet-counters is included
under configure aaa isa-radius-policy policy-name acct-include-
attributes.
55 Event-Timestamp Record the time that this event occurred on the NAS, in seconds since
January 1, 1970 00:00 UTC and send when hardware-timestamp is
included under configure aaa isa-radius-policy policy-name acct-
include-attributes.
Table 69 LSN Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
