RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 233
97 Framed-IPv6-Prefix Inside private ipv6address of the user (NAT64,DSLITE) and send when
framed-ipv6-prefix is included under configure aaa isa-radius-policy
policy-name acct-include-attributes.
26-6527-11 Alc-Subsc-ID-Str The reported format is LSN44@, DS-lite@ and NAT64@ followed by
the users inside ipv4 or ipv6 address and send when nat-subscriber-
string is included under configure aaa isa-radius-policy policy-name
acct-include-attributes. This attribute has the same content as
[1]User-Name for subscriber-unaware Large Scale NAT users.
26-6527-100 Alc-Serv-Id Refers in the Accounting-Request to the inside VRF used for LSN
subscribers using RADIUS LSN accounting (configure aaa isa-radius-
policy policy-name nat acct-include-attributes inside-service-id).
The outside VRF is reported via [26-6527-140] Alc-Nat-Outside-Serv-
Id.
26-6527-121 Alc-Nat-Port-Range This attribute is used to report allocated or released NAT resources in
LSN. The reported NAT resources include a public IPv4 address, public
port range(s), and outside routing instance.
This attribute is included in accounting by configuring the port-range-
block option under the configure aaa isa-radius-policy policy-name
acct-include-attributes CLI hierarchy.
26-6527-140 Alc-Nat-Outside-
Serv-Id
Refers to the public outside service-id and send when outside-service-
id is included under configure aaa isa-radius-policypolicy-name
acct-include-attributes.
26-6527-141 Alc-Nat-Outside-Ip-
Addr
Holds for the NAT user his public outside ipv4 address and send when
outside-ip is included under configure aaa isa-radius-policy policy-
name acct-include-attributes. The content of this attribute is identical
to the outside ipv4 address in [26-6527-121] Alc-Nat-Port-Range.
26-6527-163 Alc-Acct-Triggered-
Reason
A reason attribute included in Acct-Interim messages to specify the
reason for the interim update. Attribute is included in LSN accounting
only when acct-include-attribute acct-trigger-reason is enabled in
the isa-radius-policy.
Table 69 LSN Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
