RADIUS Attributes Reference
234
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
Table 70 LSN Accounting (Limits)
Attribute ID Attribute Name Type Limits SR OS Format
1 User-Name string [32|64] chars Subscriber unaware: LSN44@<ipaddr>, DS-
lite@<ipv6addr> and
NAT64@<ipv6addr>Subscriber aware: format
and length depends on the subscriber-
identification attribute configuration- attribute-
type alc-sub-string max 32 chars- attribute-
type user-name, class and station-id max 64
chars- attribute-type imsi and imei max 32
chars
Example:# subscriber unaware: NAT64 host
ipv6 address 2001::0001User-Name =
NAT64@2001:0000:0000:0000:0000:0000:00
00:0001# subscriber aware: NAS subscriber-id
= private-user1 and subscriber-identification
alc-sub-stringUser-Name = private-user1
4 NAS-IP-Address ipaddr 4 Bytes Example:# ip-address 10.1.1.1NAS-IP-
Address 0a010101
5 NAS-Port integer 4 Bytes Example:# MS-ISA MDA 1/2 # 1/2/nat-out-ip
corresponds to [000] [slot 0001] [mda 0010]
[nat-outip 00010] [000 0000 0000 0000]: value
37814272#
Note: nat-out-ip is translated value 2 (00010)
and it represents the logical port on the ms-isa
(show port 1/2 returns all virtual ports)NAS-
Port = 37814272
8 Framed-IP-
Address
ipaddr 4 Bytes Example:# private inside ipv4address LSN44
user192.168.0.1Framed-IP-Address =
192.168.0.1
30 Called-Station-Id string 17 Bytes 00-00-00-00-<natgroup>-<natmember>
Example:# nat group 1 and nat member 1#
Called-Station-Id =
30302d30302d30302d30302d30312d30312d
Called-Station-Id = 00-00-00-00-01-01
32 NAS-Identifier string 32 chars Example:NAS-Identifier = PE1-Antwerp
42 Acct-Input-Octets integer 4 Bytes Example:Acct-Input-Octets = 5000
43 Acct-Output-
Octets
integer 4 Bytes Example:Acct-Output-Octets = 2000
To Next Page
Loading...
