RADIUS Attributes Reference
268
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
Notes:
1. To target a subscriber host in a retail service it is mandatory to include the [26-6527-17] Alc-Retail-
Serv-Id attribute. Omitting this attribute results in a CoA NAK with [101] Error-Cause attribute value
503 (Session Context Not Found).
2. Although a single host is identified, the CoA or Disconnect Message will apply to all hosts of a dual
stack PPPoE session or IPoE session (if enabled).
Table 86 CoA and Disconnect Message: Subscriber Host Identification Attributes
# (priority) Attribute
ID
Attribute Name Notes Identifies
1
NAS-Port-Id
+ single
address/
prefix
attribute
1, 4
87 NAS-Port-Id + IP address/prefix
Single host
2
8 Framed-IP-Address + [87] NAS-Port-Id
Single IPv4 host
2
26-6527-99 Alc-Ipv6-Address + [87] NAS-Port-Id
Single IPv6 host (IA_NA)
2
97 Framed-Ipv6-Prefix + [87] NAS-Port-Id Single IPv6 host
(SLAAC)
2
123 Delegated-Ipv6-Prefix + [87] NAS-Port-Id
Single IPv6 host (IA_PD)
2
2 44 Acct-Session-Id
(number format)
Host acct-session-id
Single host
2
Queue instance acct-
session-id
All hosts attached to this
sla-profile instance
3
HSMDAv2: all hosts of the
corresponding
subscriber
3
Session acct-
session-id
All hosts of the dual stack
PPPoE or IPoE session
3 26-6527-
225
Alc-BRG-Id — Updates the BRG and all
sessions attached to this
BRG.
4 26-6527-11 Alc-Subsc-ID-Str — All hosts of the
corresponding
subscriber
3
5 26-6527-
100
Alc-Serv-Id + [8] Framed-IP-
Address
Single IPv4 host
5
8 Framed-IP-Address + [26-6527-100] Alc-
Serv-Id
Single IPv4 host
5
To Next Page
Loading...
