188
Nokia A032 Advanced User Guide
Authentication phase (logging in)
Almost all ISPs require you to identify yourself
by logging in after the LCP phase is complete.
What happens Possible problems and solutions
The Nokia A032 will send the user name
and password which you have previously
configured.
If the login is accepted you will see an
accept message in the PPP log.
If the login is not accepted, you will
either see a reject message in the PPP
log, or the line will just be dropped by the
ISP. If your password is not accepted
there may be several causes including:
• Incorrect capitalization
With most ISPs, the password open is
not considered the same as Open.
• Missing prefix
Sometimes the username needs to be
prefixed with a network identifier. For
example, an ISP called Fastnet Inc.
might require the user name to be
prefixed with the string FSN/. Check
with your ISP.
• Login script required
The ISP does not accept logging in via
PPP and requires the use of a login
script. See Setting a logon script on
page 55.
A032-Adv.book Page 188 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
