Nokia E60 - Page 21

Transfer data with Bluetooth or
infrared
To start transferring data from a compatible device, select
Menu > Tools > Transfer.
Bluetooth connectivity
1. In the information view, select Continue.
2. Select Via Bluetooth. Both devices must support the
selected connection type.
3. Activate Bluetooth in your other device, and select
Continue in your Nokia E60 to start searching for
devices with active Bluetooth connectivity.
4. Select Stop in your Nokia E60 after it has found your
other device.
5. Select your other device from the list. You are asked
to enter a passcode (1 to 16 digits) on your Nokia E60.
The passcode is used only once to confirm this
connection.
6. Enter the code on your Nokia E60, and select OK. Enter
the passcode on your other device, and select OK. The
devices are now paired. See "Pair devices," p. 58.
For some phone models, the Transfer data application
is sent to your other device as a message. To install
Transfer data on your other device, open the message,
and follow the instructions on the display.
7. From your Nokia E60, select the content you want to
transfer from your other device, and OK.
Infrared connectivity
1. In the information view, select Continue.
2. Select Via infrared. Both devices must support the
selected connection type.
3. Connect the two devices. See "Infrared," p. 60.
4. From your Nokia E60, select the content you want to
transfer from your other device, and OK.
Content is copied from the memory of the other device to
the corresponding location in your device. Copying time
depends on the amount of data to be transferred. You can
also cancel and continue later.
The necessary steps for data transfer may vary depending
on your device, and whether you have interrupted data
transfer earlier. The items that you can transfer vary
depending on the other device.
Synchronize data with another
device
If you have previously transferred data to your Nokia E60,
and your other device supports synchronization, you can
use Transfer to keep the data of the two devices up to
date.
1. Select Phones, and press the joystick.
2. Scroll to the device from which you transferred data,
and press the joystick.
3. Select Synchronise, and press the joystick. The devices
start synchronizing using the same connection type
that you selected when you originally transferred
data. Only the data that you originally selected for
data transfer is synchronized.
21
Get started
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 21 Feb 23, 2006 10:58:54 AMfile:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 21 Feb 23, 2006 10:58:54 AM