Nokia E60 - Callback Requests; Log in to Push to Talk Service; Push to Talk Calls

Connection settings
Select Options > Settings > Connection settings.
Define the following:
• Domain — Enter the domain name obtained from
your service provider.
• Access point name — Select the push to talk access
point.
• Server address — Enter the IP address or domain
name of the push to talk server obtained from your
service provider.
• User name — Enter your user name obtained from
your service provider.
• PTT password — Enter a password, if required, to log
into the push to talk service. The password is provided
by the service provider.
Log in to push to talk service
If you have set Application start-up on in User settings,
push to talk automatically logs in to the service when
started. If not, you must log in manually.
To log in to a push to talk service, select Options >
Settings > Connection settings, and enter your User
name, PTT password, Domain, Server address, and Access
point name. Select Options > Switch PTT on.
When the Ringing type setting of your device is set to
Beep once or Silent, or there is an ongoing phone call, you
cannot make or receive push to talk calls.
Push to talk calls
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume may
be extremely loud.
Select Options > PTT contacts.
To make a push to talk call, select one or several contacts
from the list, and press the voice key. Remember to hold
the device in front of you during a push to talk call so you
can see the display. The display informs you when it is
your turn to speak. Speak towards the microphone, and
do not cover the loudspeaker with your hands. Press and
hold the voice key the entire time you are talking. When
you have finished talking, release the key.
To end the push to talk call, press the end key.
Answer or reject a call
When you receive a push to talk call, press the call key to
answer the call or the end key to dismiss the call.
Callback requests
To send a callback request, select Options > PTT
contacts, scroll to the desired contact, and select
Options > Send callback request.
To answer a callback request, select Show to open the
callback request. To make a push to talk call to the sender,
press the voice key.
30
Make calls
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 30 Feb 23, 2006 10:58:54 AMfile:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 30 Feb 23, 2006 10:58:54 AM