Nokia E60 - Packet data; Net call settings

In that case the best available access point inside a group
is used for making connection and in case of e-mail, also
for roaming. See "Access point groups," p. 64.
Packet data
Select Menu > Tools > Settings > Connection > Packet
data.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your device
in GSM and UMTS networks, it is possible to have multiple
data connections active at the same time; access points
can share a data connection, and data connections
remain active (for example, during voice calls). See
"Connection manager," p. 62.
Packet data settings
The packet data settings affect all access points using a
packet data connection.
Select from the following:
• Packet data conn. — Select When available to register
the device to the packet data network when you
switch the device on in a supported network. Select
When needed to establish a packet data connection
only when an application or action requires it.
• Access point — Enter the access point name provided
by your service provider to use the device as a packet
data modem to your computer.
These settings affect all access points for packet data
connections.
Net call settings
Select Menu > Tools > Settings > Connection >
Internet tel. settings. Select Options > New profile or
Options > Edit.
Scroll to Name, press the joystick, enter a name for the
profile, and select OK.
Scroll to SIP profiles, press the joystick, select a profile and
OK. SIP protocols are used for creating, modifying, and
terminating communications sessions such as net calls
with one or more participants. SIP profiles include
settings for these sessions.
To save your settings, press Back.
Data call settings
Select Menu > Tools > Settings > Connection > Data
call.
To set the time-out period after which data calls
automatically end if no data has been transferred,
select Online time, and press the joystick. Select User
defined to enter the time yourself or Unlimited to keep
the connection active until you select Options >
Disconnect.
VPN
VPN access points
To manage VPN access points, select VPN > VPN access
points > Options, and from the following:
85
Settings
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 85 Feb 23, 2006 10:58:54 AMfile:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 85 Feb 23, 2006 10:58:54 AM