Nokia E60 - Make calls; Speed dial

Make calls
When the device is locked, calls still may be possible to
the official emergency number programmed into your
device.
In the offline profile, you may need to enter the lock code
and change the device to a calling profile before making
any call, including a call to an emergency number.
To make and receive calls, the device must be switched
on, the device must have a valid SIM card installed, and
you must be located in a service area of the cellular
network. The GPRS connection is put on hold during voice
calls unless the network supports dual transfer mode or
you have a USIM card and are within the coverage of a
UMTS network.
Enter the phone number, including the area code, and
press the call key. If you enter an incorrect character, press
the clear key.
Tip: For international calls, press the * key twice
to add the + character that replaces the
international access code, and enter the country
code, area code (omit the leading 0, if necessary),
and phone number.
To end the call or cancel the call attempt, press the end
key.
To make a call using the saved contacts, press Contacts in
standby mode. Enter the first letters of the name, scroll to
the name, and press the call key. See "Contacts," p. 35.
Press the call key to view up to 20 numbers that you last
called or attempted to call. Scroll to the desired number
or name, and press the call key to dial the number.See
"Log," p. 28.
Use the volume keys to adjust the volume of an active call.
To call your voice mailbox (network service) in standby
mode, press and hold 1, or press 1 then the call key.
Speed dial
Speed dialing allows you to make a call by pressing and
holding a number key.
Before using speed dialing, select Menu > Tools >
Settings > Call > Speed dialling > On.
To assign a number key to a phone number, select
Menu > Tools > Speed dial. Scroll to the number key (2
- 9) on the screen, and select Options > Assign. Select the
desired number from the Contacts directory.
To delete the phone number assigned to a number key,
scroll to the speed dialing key, and select Options >
Remove.
To modify a phone number assigned to a number key,
scroll to the speed dialing key, and select Options >
Change.
26
Make calls
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 26 Feb 23, 2006 10:58:54 AM